@article{kuznetsov2018strengthPLA,
  author    = {Kuznetsov, Pavel and Solonin, Alexey and Urzhumtsev, Oleksandr and Schilling, Rene and Tavitov, Alexey},
  title     = {Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process},
  journal   = {Polymers},
  year      = {2018},
  volume    = {10},
  number    = {3},
  pages     = {313},
  doi       = {10.3390/polym10030313}
}
@online{prusaInfillPatterns,
  author    = {Prusa Research},
  title     = {Infill Patterns},
  year      = {2023},
  url       = {https://help.prusa3d.com/article/infill-patterns_177130},
  note      = {Pristupljeno: 16. kolovoza 2025.}
}
@online{hermann2019extrusionwidth,
  author = {Hermann, Stefan},
  title = {The Effect of Extrusion Width on Strength and Quality of 3D Prints},
  year = {2019},
  url = {https://www.cnckitchen.com/blog/the-effect-of-extrusion-width-on-strength-and-quality-of-3d-prints},
  note = {Pristupljeno: 16. kolovoza 2025.}
}
@online{clevercreationsInfillStrength,
  author    = {Clever Creations},
  title     = {What is the Strongest Infill Pattern in Cura and PrusaSlicer?},
  year      = {2023},
  url       = {https://clevercreations.org/what-is-strongest-infill-pattern-cura-prusa/},
  note      = {Accessed: 2025-08-16}
}
@article{bellini2003mechanical,
  title={Mechanical characterization of parts fabricated using fused deposition modeling},
  author={Bellini, A. and Güçeri, S.},
  journal={Rapid Prototyping Journal},
  volume={9},
  number={4},
  pages={252--264},
  year={2003},
  publisher={Emerald Group Publishing Limited}
}

@article{sun2008effect,
  title={Effect of process parameters on the mechanical properties of 3D printed ABS using fused deposition modeling},
  author={Sun, Q. and Rizvi, G.M. and Bellehumeur, C.T. and Gu, P.},
  journal={Journal of Manufacturing Processes},
  volume={10},
  number={3},
  pages={204--214},
  year={2008},
  publisher={Elsevier}
}

@article{rods2001diffusion,
  title={Diffusion and re-entanglement in fused deposition modeling},
  author={Rodriguez, J.F. and Thomas, J.P. and Renaud, J.E.},
  journal={Rapid Prototyping Journal},
  volume={7},
  number={3},
  pages={144--152},
  year={2001},
  publisher={Emerald Group Publishing Limited}
}

@article{coogan2017thermal,
  title={Thermal modeling of interlayer diffusion during fused deposition modeling of thermoplastics},
  author={Coogan, T.J. and Kazmer, D.O.},
  journal={Additive Manufacturing},
  volume={18},
  pages={144--153},
  year={2017},
  publisher={Elsevier}
}

@article{aoyagi2002viscosity,
  title={Effects of molecular weight on surface tension and viscosity of polylactide},
  author={Aoyagi, Y. and Yamashita, K. and Yamaguchi, M.},
  journal={Journal of Applied Polymer Science},
  volume={84},
  number={6},
  pages={1233--1239},
  year={2002},
  publisher={Wiley Online Library}
}

@article{basgul2017layeradhesion,
  title={Effect of layer thickness and print orientation on mechanical behavior of fused deposition modeling parts},
  author={Basgul, C. and et al.},
  journal={Rapid Prototyping Journal},
  volume={23},
  number={2},
  pages={320--328},
  year={2017},
  publisher={Emerald Publishing}
}

@article{kuznetsov2018strengthPLA,
  title={Strength of FDM 3D printed parts: Experiments and numerical modeling},
  author={Kuznetsov, V.E. and Solonin, A.N. and Urzhumtsev, O.D. and Schilling, R. and Tavitov, A.G.},
  journal={Composite Structures},
  volume={194},
  pages={113--120},
  year={2018},
  publisher={Elsevier}
}
@article{aulia2021tensileanisotropy,
  title={Anisotropic tensile strength of 3D printed components: A review},
  author={Aulia, M. and Nugroho, A. and Pramujati, B. and others},
  journal={Materials Today: Proceedings},
  volume={46},
  pages={2341--2347},
  year={2021},
  publisher={Elsevier}
}

@article{panoto2019shear,
  title={Evaluation of shear strength and delamination of PLA material produced by fused deposition modeling},
  author={Panoto, A. and Kurniawan, D. and Siregar, E.},
  journal={IOP Conference Series: Materials Science and Engineering},
  volume={494},
  number={1},
  pages={012070},
  year={2019},
  publisher={IOP Publishing}
}

@article{zandi2020mechanical,
  title={Mechanical properties and failure behavior of 3D printed materials under various loading conditions},
  author={Zandi, M. and others},
  journal={Polymer Testing},
  volume={86},
  pages={106406},
  year={2020},
  publisher={Elsevier}
}
@book{taguchi1990introduction,
  title={Introduction to Quality Engineering},
  author={Taguchi, Genichi},
  year={1990},
  publisher={Asian Productivity Organization}
}
@article{ross1996taguchi,
  title={Taguchi techniques for quality engineering},
  author={Ross, Phillip J.},
  journal={McGraw-Hill, New York},
  year={1996}
}

@online{hermann2019layerheight,
  author    = {Hermann, Stefan},
  title     = {The influence of layer height on the strength of FDM 3D prints},
  year      = {2019},
  url       = {https://www.cnckitchen.com/blog/the-influence-of-layer-height-on-the-strength-of-fdm-3d-prints},
  note      = {Accessed: 19 August 2025}
}


@article{butt2022linewidth,
  author    = {Butt, Jawad and Bhaskar, Suresh and Mahmoodkhani, Yahya and Patel, Nilesh and Singh, Jagmeet},
  title     = {Investigating the Influence of Material Extrusion Rates and Line Widths on FFF-Printed Graphene-Enhanced PLA},
  journal   = {Journal of Manufacturing and Materials Processing},
  volume    = {6},
  number    = {3},
  pages     = {57},
  year      = {2022},
  doi       = {10.3390/jmmp6030057},
  url       = {https://www.mdpi.com/2504-4494/6/3/57},
  note      = {Accessed: 16. kolovoza 2025.}
}

@article{aboelella2025layer,
  author       = {Aboelella, Menna G. and Ebeid, Samy J. and Sayed, Moustafa M.},
  title        = {Layer combination of similar infill patterns on the tensile and compression behavior of 3D printed PLA},
  journal      = {Scientific Reports},
  volume       = {15},
  pages        = {11759},
  year         = {2025},
  doi          = {10.1038/s41598-025-94446-8},
  url          = {https://www.nature.com/articles/s41598-025-94446-8},
  note         = {Accessed: 19 August 2025}
}
@article{article_881254, 
    title={Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation}, 
    journal={European Mechanical Science}, 
    volume={5}, 
    pages={116–120}, 
    year={2021}, 
    DOI={10.26701/ems.881254}, 
    author={Eryıldız, Meltem}, 
    number={3}, 
    publisher={Ahmet ÇALIK} 
}
@article{daly2024infillCFPETG,
  author    = {Daly, Mohamed and Tarfaoui, Mostapha and Chihi, Manel and Bouraoui, Chokri},
  title     = {Effects of Infill Density and Pattern on the Tensile Mechanical Behavior of 3D‑Printed Carbon‑Fiber Reinforced PETG Composites by the FDM Process},
  journal   = {Materials},
  year      = {2024},
  volume    = {8},
  number    = {4},
  pages     = {115},
  doi       = {10.3390/ma8040115},
  url       = {https://www.mdpi.com/2504-477X/8/4/115},
  note      = {Accessed: 19 August 2025}
}
@book{bazjanacNauka1,
  author    = {Bazjanac, Dragutin},
  title     = {Nauka o čvrstoći I. DIO},
  year      = {1963.},          
  publisher = {SVEUČILIŠTE U ZAGREBU},
  address   = {Zagreb},          
}
@article{cojocaru2025dogbone,
  author    = {Vasile Cojocaru and Doina Frunzaverde and Gabriela Marginean},
  title     = {On the Use of Different Types of Standardized Dogbone Specimens for Tensile Tests of PLA Printed by MEX: A Comparative Analysis},
  journal   = {FME Transactions},
  volume    = {53},
  number    = {2},
  pages     = {335--343},
  year      = {2025},
  publisher = {Faculty of Mechanical Engineering, University of Belgrade},
  doi       = {10.5937/fme2502326C},
  note      = {ISSN 1451-2092}
}